Production Grades
China National Standard Grades: TA1, TA2, TA3, TA7, TA9, TA10, Tc4, TC4ELI, Tc6, TC9, TC10, TC11
American Standard Grades: Gr1, Gr2, Gr3, Gr5, GR7, GR12
Product Specifications
| Nom du produit | Caractéristiques (Size mm) | Supply Grade | Standard |
|---|---|---|---|
| Titanium and Alliage de titane rods | Φ(30-200)≤X3000 | TA1, TA2, TA3, TA4, TA9, TA10, Tc4, Tc6 | GB/T2965-2007, ASTM B265 |
| Titanium and Titanium Alloy rods | Φ(8-60)≤X4300 |
Dimensions and Tolerances for Titanium Bars
| Property | Specification |
|---|---|
| Diameter | 3.0 – 200 mm |
| Length | 1000 – 6000 mm |
| Tolerance | H7 – H11 |
Production States
- État de travail chaud (R)
- État travaillé au froid (Y)
- État recuit (M)
- Solution treated state (ST)
Manufacturing Process
Titanium Bar Manufacturing Process:
- Hot forging
- Hot rolling
- Turning (Polishing)
Standards
| National Standard | American Standard |
|---|---|
| GB/T2965-2007 | ASTM B348 |
| GB/T13810 | ASTM F136 |
| Q/BS5331-91 | ASTM F67 |
| AMS 4928 |
Referenced Standards
- GB 228 Metal Tensile Test Methods
- GB / T 3620.1 Titanium and Titanium Alloy Grades and Chemical Composition
- GB / T 3620.2 Chemical Composition and Permissible Deviation of Titanium and Titanium Alloy Processed Products
- GB 4698 Éponge Titane, Titanium, and Titanium Alloy Chemical Analysis Methods
Technical Requirements
- The chemical composition of titanium and titanium alloy bars shall comply with GB/T 3620.1. If repeated verification is required, the permissible deviation of chemical composition shall comply with GB/T 3620.2.
- The diameter or side length and its permissible deviation of hot worked rod
- The permissible deviation of the diameter of turned (polished) bars and cold-rolled, cold-drawn bars after hot working.
- The out-of-roundness of turned (polished) bars after hot working shall not be greater than half of the dimensional tolerance.
- The random length of processed bars is 300-6000 mm; the random length of annealed bars is 300-2000 mm. The fixed length or multiple lengths should be within the range of random lengths. The permissible deviation of the fixed length is +20 mm; the multiple lengths should also consider the cut length of the bars, which is 5 mm per cut. The fixed or multiple lengths should be specified in the contract.
Critiques
Il n'y a pas encore de critiques.